Home > Carbide Burrs >

Left Hand Cut Carbide Burr Shape D
Left Hand Cut Carbide Burr Shape D

List Price: $25.00
Our Price: $18.50
Sale Price: $18.50
Savings: $6.50

Availability:: Usually Ships in 1 to 2 Days
Product Code: LHCARBSHPD



Description Technical Specs
Left Hand Carbide burr shape D
Oval elongated shape.
1/8" shank diameter. Left hand cut carbide burr for contra-angles.
Left Hand cut Carbide burrs can be used with all Rotary Hand Tools if used with SRMC style motor, which has reverse.
Left Hand Cut carbide burrs can be used with 1MC and 266MC with TXMC drive motor.
Reasons for needing to turn cutters backwards would include that you do not have enough room to work against rotation, and at times you can not get the proper head angle to keep the cutter from chattering or trying to bounce. The cutter can also have a tendency to walk out of the port or hole if you have the wrong rotation. You can turn the cutter in the opposite direction by using the left-hand cutters in the #1MC and inserting them into the back-side of the head (head plate) and pushing the cutter shank into the head until it is flush with the collet, Making sure that the end of the shank is into the collet so that you can see the tip of the shank.
Highest quality Tungsten Carbide burrs available! Made in the USA, professional grade and superior quality guaranteed!

TJ's Tips for Porting: Left Hand cut burrs are the best thing to use for contra angles and areas where you tend to get skipping and chattering of the burr. Left Hand cut burrs are easy to use with the 1MC and a TXMC Motor, or the 182AMC if you have a SRMC Motor.
Carbide bur, burrs, carbide bits, bits, Tungsten Carbide Burr

For more shipping, payment, or ordering options simply email this product to [email protected] . We also accept Visa and MasterCard!
  • Left hand cut, reverse cut, tungsten carbide burr

Share your knowledge of this product. Be the first to write a review »